What Are Some Of The Easiest Ways To Texture Drywall

What Are Some Of The Easiest Ways To Texture Drywall

Mastering how to texture walls is more than giving flat surfaces eye-catching textures. You can easily conceal any wall flaws using texturing techniques. Texture techniques save you the headache of doing a dozen little drywall repairs. As a result, the procedure is both a popular home improvement project and an art form.

Easy Drywall Textures For Home

A drywall installer can paint, finish drywall work and install various surfaces. They can also be referred to as drywallers or installers. Some of the easy and quick textures that your drywall installer can give to your house

Texturing Walls With Drywall Joint Compound

The joint-taping compound is commonly known as drywall mud. It can be obtained at any home improvement store and can be used to simulate a stucco finish on walls. Even if you plan a DIY, you can get satisfying results with this practically fail-safe procedure. Working with a compound has a few advantages. One is that you can quickly start over if you apply too much or place it incorrectly. Usually, drywall installers use a trowel or a squeegee with indentations to apply joint compound.

Orange Peel

The texture of an orange peel drywall is similar to an orange peel. Before applying the texture,  drywall experts prepare the walls to adhere to a clean, smooth surface. Then, they use an air compressor, a drywall compound, and a hopper cannon with an air-adjustable valve. They pour the drywall compound into the hopper after combining it with water. Its consistency is similar to thick paint or soupy pancake batter. After deciding on a pattern, they spray a minimal quantity from the hopper to sample material. To achieve the required texture on the wall, splatters of a compound should be applied in small amounts, exposing some of the primed drywall.

Skip Trowel Texture

Drywall Installation Work

Drywall installers tilt a knife during compound application to create a “skip trowel” wall texture. Don’t be fooled: you’ll need a steady hand to accomplish this. Use a sea sponge roller and taping compound. Cover roughly 80% of the wall with the mix on rolling on. Gently polish the higher parts before the mixture dries. Skip trowel texture is good for easy drywall repairs.

Stomp-Knockdown Texture

The stomp-knockdown technique requires drywall experts to repeatedly strike a wall covered in a compound with a particular brush. With each blow, some of the mud slides away from the wall. The drywall installer follows up with a knife or paint scraper to remove unwelcome peaks before the compound begins to dry.

Texturing Walls With Paint

A series of textured paints are offered by several of the major paint producers. These products function similarly to drywall mud. However, they need to be applied with more care because they are more difficult to remove.

drywall contractor

When using textured paint, for instance, you must rush to cover the surface before the coat dries completely. Rigid lines may emerge where they connect if one area dries before you finish wrapping the next.

Other Methods

Drywall installers use other materials such as tissue paper, rags, and deep-nap rollers to get textures. In addition, you can experiment with texturing walls by applying the mixture with a regular paint roller and then detracting some of the material you have used creatively.


Drywall installation and repair work is fun. Installers try out different methods because the compound is forgiving in nature. Allow the mixture to dry completely before painting. Drying takes up to 24 hours, depending on relative humidity. Aim a fan at the wall surface you have been modifying. Or you could just hire a drywall expert to do the work.

Read More:

Drywall and Sheet rock services | Drywall Framing and Finishing program | Drywall Installation Services | Trade programs in Philadelphia | Trade schools in Philadelphia | Vocational School in Philadelphia

Leave a Reply

Your email address will not be published. Required fields are marked *